FOAM WASH satelita

Unidoz Foam Wash Air System Satellite (FWASS15)Wall mounted low pressure foam applicator .
Wall mounted foam applicator. It projects foamed chemicals on to any surface at distances up to 6m. This venturi injection system uses standard city water pressure (2-8 Bar) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Very dense, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. Making it ideal for foam cleaning vertical surfaces and ceilings, with low detergent consumption. The foam is projected through the discharge hose and fan nozzle. Thanks to the complete absence of vaporization, it can also be used in complete safety with very alkaline foam detergent

Unidoz Foam Wash Air System Technical Data

  • Foaming: Minimum 2 bars in absolute safety without vaporization
  • Water: From 2 to 8 bars (normally mains pressure is between 2 and 4 bars)
  • Air: From 3 to 10 bars (the foam becomes denser as air pressure increases)
  • Water flow: 250 I/h (mean value)
  • Adjustable foam consistency (wet/dry)
  • Working temperature: With detergent foam, use of water at room temperature is recommended. However, water at a temperature of not more than 50°C can be used
  • Surface treated: About 10 m2 per minute
  • 12 dilution levels from 0,1 % to 16 %
  • up to 25m discharge hose, stainless steel ball valve, polypropylene foam wand and fan nozzle
  • Weight box: 13Kg.
  • System: stainless steel, brass
  • Backflow valve